The owner of a 12-person managed IT company in Denver launches his first LinkedIn campaign on a Monday. The audience is operations managers and office managers at Colorado companies with 50 to 500 employees, the people who decide who fixes the printers, the firewall and the laptop that won't boot. The budget is $75 a day. By Thursday, Campaign Manager shows $0.00 spent, no impressions, no clicks.
His first instinct is the one most owners have: LinkedIn must want more money. He raises the daily budget to $150 and waits another day. Still nothing.
A bigger budget does nothing for an ad that isn't allowed to run, and that is almost always what $0 means. Here is the short answer: when a LinkedIn ad won't spend, one specific thing is stopping it, and Campaign Manager usually tells you which one. It is an ad stuck in review or rejected, an account on hold over a payment, an audience under LinkedIn's minimum, a bid too low to win, or, occasionally, a glitch on LinkedIn's side. This article walks through those checks in the order worth doing them, using the Denver company's account, and shows where in Campaign Manager each answer is sitting.
If your ads are spending but not producing leads, that is a different problem, and we worked through it in Why Aren't Your LinkedIn Ads Working? This one is about the spend itself.
An Ad Runs Only When the Campaign, the Ad Set and the Ad All Say Active.
LinkedIn organizes every account in three levels. The campaign holds the shared settings, such as a total budget and dates. Inside it sit one or more ad sets, which hold the audience, the bid, the budget and the schedule. Inside each ad set sit the ads. If your account is older, you may know these as campaign groups and campaigns; LinkedIn's help pages now call them campaigns and ad sets, and the logic hasn't changed.
LinkedIn's help page on ad set statuses puts the rule in one line: for an ad to be displayed, the campaign status, the ad set status and the ad status must all be active. A green "Active" on the ad set means nothing if the campaign above it is paused or the ad inside it is still in review.
So the first check takes a minute. Open the campaign, then the ad set, then the Ads tab, and read the status column at each level. When something is blocking delivery, LinkedIn doesn't just say "inactive." It shows Not delivering, followed by the reason:
- Not delivering - Scheduled or Campaign scheduled: the start date hasn't arrived yet, at the ad set or the campaign level.
- Not delivering - No active ads: the ad set is fine, but every ad inside it is paused, in review or rejected.
- Not delivering - Campaign is paused or Group budget reached: the campaign above it has stopped, or its shared budget is spent.
- Not delivering - Audience too small: covered below.
- Not delivering - Account on hold: also covered below, and the most expensive one to miss.
LinkedIn also lists these on the Overview page you land on when you sign in. In its task list, it shows status alerts when campaigns, ad sets or ads aren't delivering, with a suggested next step. It is easy to click straight past that page to the campaign you're worried about, which is exactly what the Denver owner did. His answer had been sitting in the status column since Monday. We'll get to it.
One status fools people because it sounds final. An ad set can show Completed when it has simply hit its daily budget for the day. LinkedIn's help page says so directly, and adds that it starts running again the next day on its own. If you see Completed on an ad set with no end date and money left, check it again tomorrow before changing anything.
An Ad That Has Spent $0 Can Still Be Running. LinkedIn Only Charges When Someone Clicks.
Before you go hunting for a problem, make sure there is one.
The Denver company built its ad set on the Website Visits objective. On that objective, LinkedIn charges you when someone clicks through to your site, not when the ad appears in a feed. AJ Wilcox, whose agency B2Linked has run nothing but LinkedIn ads since 2014, says this is the most common "not delivering" case he sees: the spend column reads zero, but the ad has been showing all along. It has earned impressions, a few reactions and maybe a click to the company page, all free, and just no paid click yet.
Two places in Campaign Manager settle it in under a minute:
- The impressions column. Switch the columns view from performance to engagement. If impressions are climbing, the ad is delivering. You have a click-rate question, not a delivery question.
- The performance chart. Select the ad set, open the performance chart and set it to impressions by day. A flat line at zero is a real delivery problem. A line that rises and falls is an ad that is running.
If you run message ads, impressions aren't the right number. Check sends instead, which show whether LinkedIn is delivering the message even if nobody has opened it.
The Denver account showed zero impressions in both places, so it had a real block.
An Ad in Review Spends Nothing. A Rejected Ad Tells You Exactly Why.
Every new LinkedIn ad goes through review before it can run, and so does every edit to an ad. LinkedIn's help pages say review usually takes up to 24 hours, and that if an ad sits in review longer than that, you can contact support to push it along. Until it clears, the ad's status reads In review and the ad set above it shows no active ads.
That timing is why LinkedIn recommends setting up an ad set at least 48 hours before its start date. It leaves a day for review and a day to fix anything that gets rejected. Launch at 9 a.m. on the day a promotion starts and you may lose the first day to review.
It also means a nervous owner can keep an ad off the air indefinitely. Change a headline on Tuesday, fix a typo on Wednesday, swap the image on Thursday, and each edit sends the ad back into review.
If the status reads Rejected, LinkedIn tells you why. Click the Rejected status in Campaign Manager and it opens a notice explaining which policy the ad or form broke, with a link to edit it and an option to appeal. The same notice arrives by email if your notifications are turned on. You have two moves:
- Edit it. Fix the problem and save. The edited ad is resubmitted for review automatically.
- Appeal it. If you believe the ad already follows LinkedIn's policies, submit an appeal from the notice page or the email. LinkedIn says it usually responds within 24 hours.
A rejection doesn't have to mean the ad said something controversial. LinkedIn's ad guidelines include house rules that an owner writing a first ad has no reason to know exist:
- Too many capital letters or emojis in the copy, or animated GIFs and unrelated hashtags.
- Contact details in the ad text, such as a phone number or email address.
- The word "LinkedIn" in the ad, or anything implying LinkedIn endorses you. "Find me on LinkedIn" is the allowed exception.
- A price or offer that doesn't match the landing page. "Free network assessment" in the ad and "$299 assessment" on the page is a rejection.
- Ad language that doesn't match the audience's language setting. The ad and the landing page should match the language you picked in the audience settings.
- A landing page that breaks the rules: a broken link, a back button that doesn't work, billing terms that are hard to find, or a missing privacy policy where one applies.
- Anything that looks like a test. LinkedIn won't approve test ads.
The Denver company's ad had passed review on Monday afternoon. Its problem sat one level higher than any campaign.
One Declined Card Puts Every Ad in the Account on Hold.
When a LinkedIn ad account goes on hold, nothing in it runs. Every ad, in every ad set, in every campaign, stops until the hold is removed. LinkedIn marks it with a red banner across the top of Campaign Manager stating the reason, and the ad sets underneath show Not delivering - Account on hold.
LinkedIn's help page says the most common reason is a billing problem or a missing payment method. Its list of hold reasons is worth knowing in advance, because two of them catch small businesses specifically:
- Missing payment information. A new ad account with no credit card on file is on hold from the start.
- A declined card. The bank refused the charge, often because a spend limit was hit or the billing details don't match the bank's records. LinkedIn can't see why. Only your bank can tell you.
- An expired card. Update it on the Billing page.
- A new billing admin. This is the one that surprises people. When the billing admin on an ad account changes, LinkedIn automatically puts the account on hold until the new admin adds a credit card. Card details don't carry over from one person to the next.
- An unpaid balance in another ad account where you are also the billing admin.
- A flagged user. If LinkedIn identifies someone with access to the ad account as a potentially fake or spam profile, it can hold the account until that person is removed.
The billing admin case is how the Denver account stalled, and its ad sets had said Not delivering - Account on hold since launch. The office manager who had set up the ad account months earlier, for a promotion that never ran, had left the company. The owner made himself billing admin so he could run the new campaign. The account went on hold the moment he did, and stayed there until he added his own card. The red banner had been there all week.
Fixing a billing hold is quick. Only the billing admin can add or update a card, under Billing in Campaign Manager. Two details from LinkedIn's help pages save a second round of confusion. First, when you add a card, LinkedIn may place a small temporary authorization hold on it to check that it's valid, which clears on its own within 5 to 7 business days. Second, if the account is still on hold after you update the card, read the banner again: the reason may have changed.
Who controls the ad account, and who can lock you out of it, is worth sorting out before anything goes wrong. We covered company page and ad account access in Do You Need a LinkedIn Company Page to Run Ads?
LinkedIn Won't Run an Ad Set Under 300 Members. At 400, Your Budget Barely Moves.
LinkedIn sets a hard floor on audience size. Its help page on ad set statuses says it plainly: the minimum audience size is 300 members. Below that, the ad set shows Not delivering - Audience too small, and it won't run until you widen it.
Owners usually hit this one with uploaded lists. You upload 500 contacts or 250 target companies, LinkedIn matches only some of them to real members, then you narrow the match further by job title or seniority, and the audience drops under 300 without anyone noticing. We explained why uploaded lists shrink, and how to keep them above the floor, in You Uploaded 2,000 Contacts. Your Audience Is 1,200.
Clearing 300 doesn't guarantee spend, though. An audience is only as large as the number of those people who actually log in. Wilcox sees this most often with account-based lists of 300 to 800 people. If those people visit LinkedIn rarely, there simply aren't enough chances each day to show them an ad, and a $75 daily budget can sit mostly unspent no matter how high you bid.
That leaves two honest choices:
- Widen the audience. Add related job titles, add companies, or loosen seniority. Check the audience estimate before saving, not after.
- Accept the pace. If the list really is the 400 people you want, a slow spend is the price of that precision. Give it a modest budget, don't expect it to use everything you allow, and judge it monthly instead of weekly, so a quiet Tuesday doesn't look like failure.
What doesn't work is raising the budget. The constraint is how many people show up, not how much you're willing to pay.
A Bid Below LinkedIn's Suggested Range Loses the Auction Without an Error.
Every LinkedIn impression is an auction. If you bid manually, Campaign Manager suggests a bid range and warns you when your bid is below it. LinkedIn's help page on manual bidding says what happens if you ignore the warning: the ad set is less competitive, gets fewer placements, and the warning tells you the bid will not reach the target audience. It is still Active. It just keeps losing.
A low bid is easy to set by accident. LinkedIn accepts a manual bid as low as one cent. An owner who sees a suggested range of $9 to $14 a click and types $5, because $5 feels like plenty for one visit, has built an ad set that will spend almost nothing.
A bid can also lose inside the suggested range. Wilcox points to relevance: if your ad scores worse than the competing ads in the same auction, you may need to raise the bid more than once before LinkedIn starts showing it.
The fix is the same routine an agency uses when it audits a stalled account:
- Raise the bid in steps. Move it up a little, wait a couple of days, and check impressions before moving it again. Stop when the next increase would put your cost per click above what a click is worth to you.
- Wait out the reporting lag before you raise it again. Wilcox has seen Campaign Manager stop updating for a day while the ads were in fact running. Owners who keep raising the bid through a reporting gap find out the next day that they paid far more per click than they needed to. He says it is rare, roughly twice a year in his accounts, but it is exactly the day you will be tempted to keep bidding.
- Use maximum delivery as a short test. Switching the ad set to maximum delivery hands the bid to LinkedIn's automated bidding. If the ad set suddenly spends, a bid that was too low was the problem, and you can go back to manual bidding at a higher number. Expect it to spend hard while you test. LinkedIn's budget rules let daily spend run up to 100% over the daily budget on a given day, though never more than seven times the daily budget across a week.
We compared manual bidding, maximum delivery and cost cap in LinkedIn Has Three Ways to Bid. It Defaults to the Priciest.
A Stuck LinkedIn Ad Set Is Faster to Duplicate Than to Diagnose.
Sometimes every check passes. The campaign, the ad set and the ad all say Active, the account has a working card, the audience is in the tens of thousands, the bid is inside the range, and the performance chart is still a flat line.
The answer from the same troubleshooting routine is unglamorous: it may simply be a glitch on LinkedIn's side, and it happens more often than you'd expect. Nothing shows an error. The ad just doesn't serve.
The fastest fix is to duplicate the ad set and the ad and launch the copy. The copy has the same objective, targeting, format and creative, but new IDs, and that is sometimes enough to clear whatever had stuck. The copy goes through review like any new ad, so allow a day. Pause the original so the two don't run against each other.
Duplicating costs less than it sounds. LinkedIn has no learning phase to reset, which we covered in LinkedIn Has No Learning Phase. That Is Not Permission to Fiddle. What you give up is the original's reporting history, so note its numbers before you pause it.
If the copy won't spend either, take it to LinkedIn. There is a support chat icon in the bottom right of Campaign Manager, and support can see account-level problems you can't.
A Bigger Budget Won't Fix a Rejected Ad, a Declined Card or a 280-Member Audience.
Here is the order that saves the most time, because each check takes a minute and rules out a whole category:
- Impressions first. If the ad is showing, you don't have a delivery problem.
- Status at all three levels. Read the Not delivering reason; it usually names the problem.
- The ad review. In review means wait or contact support. Rejected means read the notice, then edit or appeal.
- The red banner. An account hold stops everything, and a new billing admin triggers one automatically.
- The audience. Under 300 won't run. Barely over 300 may barely spend.
- The bid. Below the suggested range, raise it in steps a few days apart.
- Duplicate, then support.
The Denver company's fix took four minutes once the owner read the banner. His ads were live by lunch. He also put the daily budget back to $75, because that had never been the problem. If you have several small ad sets competing for one modest budget, that is a separate fix, and we covered it in You Have Four Campaigns and a Budget for One.
If you'd rather have someone watching the account so a hold, a rejection or a losing bid gets caught the day it happens instead of the week after, that is part of what our LinkedIn ads management team does. And if you run it yourself, keep this checklist next to Campaign Manager.




